Tuesday, 5 December 2017

RESTORATION OF HMB ENDEAVOUR...A look at the process of a typical restoration


The model was presented to us as a well carved, well sparred and rigged replica of the ship sailed by Captain Cook to chart the oceans and coast of the ‘New World’
The model has been painted in the colours of the replica ship lying in Darling Harbour, Sydney.
 Our commission was to strip the hull of all new paint and return it to its original varnished natural timber with dark brown painted bulwarks, stern and sacrificial keel.

Unfortunately the paint that had been used was plastic based acrylic household variety and therefore extremely difficult to remove as sanding with a Dremel melted the paint and clogged our sanding flip wheels.
Therefore we had to hand scrape the hull etc. Thus adding much time to the prep job.




Worse was to follow when we found the end grain areas fore and aft had areas of rot that hadn’t been cured prior to painting. This resulted in deep penetration of paint into the grain areas of soft wood. Had clear epoxy sealant been applied prior to painting these problems would in the main been avoided.
On completing our stripping of the hull we found areas of rot had been filled with grey epoxy filler. These areas have had to stay as and are apparent under our varnish.
My comments here sound depressing but luckily most of the paint penetration and rot is concentrated in the bow and stern and the main sides of long grain present well.

The two plastic ships boats were removed and we carved a new long boat from Australian cedar.




The stern gallery and port and starboard cabin windows were repainted and gilded as per Captain Cook’s instructions when he commissioned her. This work was carried out at his own expense.




All the plastic blocks have been black painted. It was customary at that period when navigating the tropics to apply a tar solution to stop rot.

The printed red ensign and Union Jack were removed and we printed new ones of the correct size of design.




The aim of any restoration and conservation of a model is to keep as much the original work and patina of aging as possible. This we have done and the model presents well and has, I believe, lost little of its original model maker’s individual craftsmanship.   

Tuesday, 28 November 2017

A SAILORS VENTRILOQUIST DUMMY FROM HMS BARHAM



In 1991 I received a call from a young lady in Orange, NSW. She explained that she had in her possession a ventriloquist dummy of a sailor in uniform wearing an RN cap bearing the tally...HMS Barham. Her father had been a P.O. onboard during WW2 and had entertainment the crew every Christmas with a cabaret!
He left the ship about 6 months before she was sunk by torpedo in the Mediterranean with a huge loss of life. 
On repatriation to Australia, his dummy accompanied him home.




The dummy was kindly donated to our museum and greets visitors as they arrive!
HMS Barham
HMS Barham a Queen Elizabeth Class battleship exploded and sank with a loss of 863 men in1941 after a salvo of torpedoes from a German U-boat  from at close range on November 25th 1941 in the Mediterranean. HMS Barham sank with in within 4 minutes after the ship's magazines exploded.
 The explosion was caught on film by cameraman John Turner

Sunday, 26 November 2017

HORNBY 'SWIFT' TIN PLATE CLOCKWORK TOY 1950,S


Hornby 'Swift' clockwork tin toy speed boat, a popular toy of the 1950's  

Hornby advertisement form the Meccano Magazine

CONTINUING RESTORATION OF A TWIN SCREW TUG


WORK IS CONTINUING ON THE TWIN SCREW TUG WITH REPAIRS STILL TO BE DONE ON THE DECK STRUCTURE 



Sunday, 19 November 2017

Tuesday, 14 November 2017

COMPLETED RESTORATION OF PRE WORLD WAR 1 DONKEY ENGINE

The  fully restored pre World War 1 Donkey engine in working order 




SHIPS FIGUREHEAD


Authentic Ship's Figurehead
Circa 1860
Probably  from a small trading Ketch or Schooner
Donated by John Strove
A model of a Tasmanian trading schooner, the model  built around 1850.
Typical type vessel on which the above figurehead would be found 

Thursday, 2 November 2017

MODEL OF 'AMERICA'S CUP' YACHT 'LIBERTY'


Since 1983 we have built 6 models of 'Australia II' but never a model of the yacht that lost the 'America's Cup' !
Well now as you can see, we have remedied that situation. The owner of one of our 'Australia II' models commissioned us to build a model to the same scale.
After a month of searching  we located original plans in Holland and started on our work about six months ago. The results of our labour you can see here.
Is this the only model of 'Liberty' in Australia? The only other model we know of is in the 'New York Yacht Club'.So if anyone out there would like to order one..........we are ready to go !!!